Train for Your Commercial Pilot Certificate

This is the opportunity for a pilot to learn advanced maneuvers, professional rules and regulations and work with an advanced aircraft. Under the FAA Part 61, the required time for a Commercial Pilot with an airplane category and single-engine class rating must log at least 250 hours of flight time.

FAA Requirements 
Minimum Flight Time Requirements (250 hours total):

• 100 hours in powered aircraft, of which 50 hours must be in airplanes
• 100 hours of pilot-in-command flight time, including 50 hours in airplanes and 50 hours in cross-country flight (at least 10 hours in airplanes)
• 20 hours of training on areas of operation including:
  
  • 10 hours of instrument training using a view-limiting device (5 hours must be in single engine airplane)
  • 10 hours of training in a complex airplane, turbine-powered airplane, or TAA
  • One 2-hour cross country flight (daytime) over 100 nm
  • One 2-hour cross country flight (nighttime) over 100 nm
  • 3 hours test preparation within 2 calendar months
• 10 hours of solo flight time including one cross-country flight of not less than 300 nm

• 2021 Piper Archer 28-181 G1000 (TAA):  G1000 with dual axis autopilot, 180 BHP Lycoming IO-360-B4A
• Cessna 182 Skylane G1000
• Beechcraft Baron: Multi-engine training capability
• Redbird FMX Simulator: FAA approved AATD with 50° pitch, 60° yaw, 40° roll movement

Address: 3122 S Great SW Pkwy, Grand Prairie, TX 75052
Phone: 972-988-8609
Email: support@spartanflightacademy.com